driving ...................................................(up to the end of the DU)
electronic parking brake .......................(up to the end of the DU)
2.9
ENG_UD7450_1
Frein de parking assisté (X95 - J95 - R95 - Renault)
ENG_NU_840-2_JR95_Renault_2
Electronic parking brake
ELECTRONIC PARkING bRAkE
(1/3)
Note:
To indicate that the electronic parking
brake is applied or released, a beep
sounds and the message “Apply park-
ing brake” appears on the instrument
panel:
– with the engine running: when the
driver’s door is opened;
– with the engine switched off (eg.
when the engine stalls): when a front
door is opened.
In this case, pull and release switch
3
to
apply the electronic parking brake.
Automatic releasing of the
electronic parking brake
The brake will be released as soon as
the vehicle starts and accelerates.
Automatic operation
The electronic parking brake ensures
vehicle immobilisation when the
engine
is stopped and engine Start/Stop
button
1
is pressed
.
In all other instances, e.g. engine stall-
ing, the electronic parking brake is not
applied automatically. Manual mode
must be used.
For certain country-specific model ver-
sions, the automatic brake application
function is not activated. Refer to the in-
formation on “Manual operation”.
To confirm that the electronic parking
brake is applied, the message “Parking
brake on” and indicator light
}
on the instrument panel and indicator
light
2
on switch
3
light up.
After the engine is switched off, indi-
cator light
2
goes out several minutes
after the electronic parking brake has
been applied and indicator light
}
goes out when the vehicle is locked.
Before leaving the vehicle,
check that the electronic
parking brake is fully ap-
plied. Indicator light
2
on
switch
3
and indicator light
}
on the instrument panel light up to
show that the parking brake is ap-
plied but go out when the doors are
locked.
1
2
3
