Renault 2016 Duster Owner'S Manual Download Page 94

Page: 94 / 254

Jaune

Noir

Noir texte

2.18

ENG_UD35353_1

Conseils de conduite, eco conduite (H79 Ph2 - Dacia)

ENG_NU_1079-6_H79Ph2_Dacia_2

DRIVING ADVICE, ECO-DRIVING

(4/5)

Your vehicle has a greater

ground clearance than an

ordinary passenger vehicle.

This gives it a higher centre

of gravity, making it more suscep-

tible to rolling during sudden or ag-

gressive manoeuvres, or when cor-

nering at high speeds.

Take extra care when the vehicle is

loaded (in particular when the load

is on the roof).

Ensure that all passengers are wea-

ring their seat belts.

A label

affixed to the sun visor re-

minds you of this.

Tyres

– An underinflated tyre increases fuel

consumption.

– The use of non-recommended tyres

can increase fuel consumption.

Summary of Contents for 2016 Duster































































































































































































































































Search results

Summary of Contents for 2016 Duster

Reviews:

Related manuals for 2016 Duster

Brands by name

Popular brands

Renault 2016 Duster, Owner'S Manual

Search results

Summary of Contents for 2016 Duster

Reviews:

Related manuals for 2016 Duster

Brands by name

Popular brands