Renault 2016 Duster Owner'S Manual Download Page 109

Page: 109 / 254

Jaune

Noir

Noir texte

2.33

ENG_UD39882_2

Transmission : 4 roues motrices (4WD) (H79 Ph2 - Dacia)

ENG_NU_1079-6_H79Ph2_Dacia_2

TRANSMISSION: 4-wheel drive (4WD)

(4/4)

All-wheel drive system

– Irrespective of the mode selected, do not start the engine if one or more wheels are not in contact with the ground

(eg. when the vehicle is on a jack or roller bench).

– Do not turn the mode selector when cornering, reversing or if the wheels are spinning excessively. Only select the

“2WD”, “AUTO” or “4WD Lock” mode when the vehicle is being driven in a straight line.

– Only use tyres which meet the required specifications.
– “4WD Lock” mode is reserved solely for use

off-road.

The use of this mode in any other conditions may adversely affect the

vehicle’s manoeuvrability and damage its mechanical components.

– Always ensure tyres with identical specifications are fitted to all four wheels (brand, size, structure, wear etc.). Fitting tyres

of different sizes to the front and rear wheels and/or left and right wheels may have serious consequences for the tyres,

gearbox, transfer gearbox and the rear differential pinions.

Summary of Contents for 2016 Duster































































































































































































































































Search results

Summary of Contents for 2016 Duster

Reviews:

Related manuals for 2016 Duster

Brands by name

Popular brands

Renault 2016 Duster, Owner'S Manual

Search results

Summary of Contents for 2016 Duster

Reviews:

Related manuals for 2016 Duster

Brands by name

Popular brands