Renault 2016 Duster Owner'S Manual Download Page 164

Page: 164 / 254

Jaune

Noir

Noir texte

4.6

ENG_UD37389_3

Niveau huile moteur : appoint / remplissage (H79 Ph2 - Dacia)

ENG_NU_1079-6_H79Ph2_Dacia_4

ENGINE OIL LEVEL: topping up, filling

(2/3)

Filling:

take care when

topping up the oil that

no oil drips onto engine

components - risk of fire.

Remember to refit the cap securely

as there is a risk of fire if oil splashes

onto hot engine components.

If there is an abnormal or repeated

drop in the fluid level, please consult

an authorised dealer.

Engine oil change:

if you

are changing the oil when

the engine is hot, be careful

not to scald yourself if the

oil overflows.

In order to prevent splashback, it is

recommended that a funnel be used

when topping up/filling with oil.

Summary of Contents for 2016 Duster































































































































































































































































Search results

Summary of Contents for 2016 Duster

Reviews:

Related manuals for 2016 Duster

Brands by name

Popular brands

Renault 2016 Duster, Owner'S Manual

Search results

Summary of Contents for 2016 Duster

Reviews:

Related manuals for 2016 Duster

Brands by name

Popular brands