Renault 2016 Duster Owner'S Manual Download Page 160

Page: 160 / 254

Jaune

Noir

Noir texte

4.2

ENG_UD38385_3

Capot moteur (H79 Ph2 - Dacia)

ENG_NU_1079-6_H79Ph2_Dacia_4

BONNET

(1/2)

To open the bonnet, pull handle

Unlocking the bonnet catch

To unlock, raise the bonnet slightly and

release hook

by pushing tab

to the

left.

Opening the bonnet

Lift the bonnet and guide it upwards; it

is held by strut

Closing the bonnet

Check that nothing has been left in the

engine compartment.
To close the bonnet again, hold the

bonnet in the middle and lower it to

30 cm above the closed position, then

release it. It will latch automatically

under its own weight.

The engine may be hot

during operations in close

proximity. In addition, the

engine cooling fan may

come on at any moment.
Risk of injury.

Do not press down on the

bonnet: there is a risk that

the bonnet may accidentally

close.

When working in the engine

compartment, ensure that

the windscreen wiper stalk

is in the park position.

Risk of injury.

Deactivate the Stop and

Start function for any opera-

tion performed in the engine

compartment.

Summary of Contents for 2016 Duster































































































































































































































































Search results

Summary of Contents for 2016 Duster

Reviews:

Related manuals for 2016 Duster

Brands by name

Popular brands

Renault 2016 Duster, Owner'S Manual

Search results

Summary of Contents for 2016 Duster

Reviews:

Related manuals for 2016 Duster

Brands by name

Popular brands