manualshive.com logo in svg

Renault 2016 Duster, Owner'S Manual

Share
Download
Renault 2016 Duster Owner'S Manual Download Page 49

Jaune

Noir

Noir texte

1.45

ENG_UD39234_5

Témoins lumineux (H79 Ph2 - Dacia)

ENG_NU_1079-6_H79Ph2_Dacia_1

’

4-wheel drive mode indica-

tor light

Refer to the information on “4WD Lock 

mode” in Section 2.

‘

2-wheel drive mode indica-

tor light

Refer to the information on “2WD 

mode” in Section 2.

Ð

Speed limiter warning light

Refer to the information on the 

“Speed limiter” in Section 2.

^

Water in the diesel filter war-

ning light

This lights up when the ignition is 

switched on and goes out after a few 

seconds.
If it remains lit or comes on while driv-

ing, it indicates that water is present in 

the diesel.
Contact your approved Dealer as soon 

as possible.

Indicator light

 

ESC

Refer to the information on 

“Driving correction devices and aids” in 

Section 2.

Å

Door status warning light  

This indicates the status of the doors 

(or tailgate).

WARNING LIGHTS 

(4/7)

A

Warning light for the elec-

tronic stability program 

(ESC) and traction control system

There are several reasons for the war-

ning light to come on: see “Electronic 

Stability Program ESC with understeer 

control and traction control” in Section 2.

2

 

Door(s) open warning light

Refer to “Opening/closing the doors” in 

Section 1.

Mode warning light

 

ECO  

 

This comes on when ECO mode ECO 

is activated.

Please refer to the information on 

“Driving advice, Eco-driving” in 

Section 2.

Ϧ

Cruise control warning 

lights

Refer to the information on “Cruise con-

trol” in Section 2.

The presence and operation of the warning lights DEPEND ON THE EQUIPMENT AND COUNTRY.

Summary of Contents for 2016 Duster































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands