Renault 2016 Duster Owner'S Manual Download Page 69

Page: 69 / 254

Jaune

Noir

Noir texte

1.65

ENG_UD32133_1

Essuie-vitre /Lave-vitre/Dégivrage (H79 - Dacia)

ENG_NU_1079-6_H79Ph2_Dacia_1

WINDSCREEN WASH, WIPE

(1/2)

Windscreen wiper

With the ignition on, move

stalk

around the steering wheel:

Park.

Intermittent wiping.

The wipers will pause for several

seconds between sweeps.

Normal wiping speed.

Fast wiping speed.

Windscreen wiper

With the ignition on, pull stalk

towards you.
A brief pull will trigger a single sweep

of the wipers, in addition to the wind-

screen washer.
A longer pull will trigger three sweeps

of the wipers, in addition to the wind-

screen washer.

In frosty weather, make sure that

the wiper blades are not stuck by ice

(risk of motor overheating).
Keep an eye on the condition of the

blades. They should be replaced as

soon as they become less efficient.

This will occur approximately once

a year. Clean your windscreen reg-

ularly.
If you switch off the ignition before

switching off the windscreen wiper

(position

) the blades will stop at

random on the windscreen.
After switching the ignition back on,

simply move stalk

to position

place them in the park position.

Before touching the wind-

screen (washing the vehi-

cle, de-icing, cleaning the

windscreen, etc.) move

stalk

to position

(park). Risk of

injury and/or damage.

When working in the engine

compartment, ensure that

the windscreen wiper stalk

is in position

(park). Risk

of injury.

Summary of Contents for 2016 Duster































































































































































































































































Search results

Summary of Contents for 2016 Duster

Reviews:

Related manuals for 2016 Duster

Brands by name

Popular brands

Renault 2016 Duster, Owner'S Manual

Search results

Summary of Contents for 2016 Duster

Reviews:

Related manuals for 2016 Duster

Brands by name

Popular brands