Renault 2016 Duster Owner'S Manual Download Page 195

Page: 195 / 254

Jaune

Noir

Noir texte

5.17

ENG_UD38548_2

Projecteurs antibrouillard : remplacement des lampes (H79 Ph2 - Dacia)

ENG_NU_1079-6_H79Ph2_Dacia_5

Additional lights

If you wish to fit fog lights to your ve-

hicle, please see an authorised dealer.

FOG LIGHTS: changing bulbs

Front fog lights

Consult an approved dealer.

Bulb type:

H16

or depending on vehicle,

H11.

Any operation on (or modi-

fication to) the electrical

system must be performed

by an approved Dealer

since an incorrect connection might

damage the electrical equipment

(harness, components and in partic-

ular the alternator). In addition, your

Dealer has all the parts required for

fitting these units.

The engine may be hot

during operations in close

proximity. In addition, the

engine cooling fan may

come on at any moment.
Risk of injury.

The bulbs are under pres-

sure and can break when

replaced.
Risk of injury.

To comply with local legislation, or

as a precaution, you can obtain an

emergency kit containing a set of

spare bulbs and fuses from an ap-

proved Dealer.

Rear fog lights

(depending on vehicle)

Consult an approved dealer.

Bulb type:

P21W.

Summary of Contents for 2016 Duster































































































































































































































































Search results

Summary of Contents for 2016 Duster

Reviews:

Related manuals for 2016 Duster

Brands by name

Popular brands

Renault 2016 Duster, Owner'S Manual

Search results

Summary of Contents for 2016 Duster

Reviews:

Related manuals for 2016 Duster

Brands by name

Popular brands