Remos GXiS, Pilot Operating Handbook

Page: 159 / 237

iS
G3-8 MA FM 9407 - R01
7 Airplane and Systems Description
Systems 7 - 43
adjusting altitude
Click on one of the joysticks or kick it up or down and then select the
ALT bug by either rotating the joystick or clicking up or down. Once
the ALT bug is selected, adjust the bug and therefore altitude by rotat-
ing the joystick. On the SkyView HDX800/HDX1100 only a push-and-
rotate action is required.
In case these is not sufficient power set for a climb, the autopilot will
not pull on the elevator until stall. Furthermore, below a preset speed
the autopilot gives up the climb command in favor of airspeed.
In case these is too much power set for a descent, the autopilot will
not push on the elevator until airspeed exceeds VNE. Furthermore,
beyond a preset speed the autopilot gives up the descent command
in favor of airspeed.
adjusting GPS track over ground
Click on one of the joysticks or kick it up or down and then select the
TRK bug by either rotating the joystick or clicking up or down. On the
SkyView HDX800/HDX1100 only a push-and-rotate action is required.
Once the TRK bug is selected, adjust the bug and therefore course
over ground by rotating the joystick.
selecting radial (OBS)
Click on one of the joysticks or kick it up or down and then select the
CRS by either rotating the joystick or clicking up or down. On the
SkyView HDX800/HDX1100 only a push-and-rotate action is required.
In case a VOR station is tuned in, the radial can be selected.
NOTE
An ILS is a special version of a VOR with one radial
only, that cannot be selected.
NOTE
CRS is available only in HSI+ALT mode with a VOR
station tuned in.