Remos GXiS, Pilot Operating Handbook

Page: 161 / 237

iS
G3-8 MA FM 9407 - R01
7 Airplane and Systems Description
Systems 7 - 45
normal operation
To start up the REMOS GX iS the ignition key needs to be inserted and
set into position AVIONIC. Now the following systems are active:
•
SkyView system
•
ATC radio(s)
•
intercom or audio panel
•
GPS
•
flaps
•
trim
Following systems are still inactive:
•
engine control
•
landing light
•
NAV lights
•
anti-collistion lights
This key position is intended to set-up the avionics, program the GPS,
request start-up clearance, etc. Flight schools will prefer this position
to introduce the student pilot into the aircraft, the avionics and sys-
tems.
Next step is to set the ignition key into position ENGINE. All systems
that have been offline until now are switched on. To fire up the engine
the central ENGINE START button needs to be hit, the REMOS
SMARTstart system takes over control during the start-up process. In
cold weather, throttle should be cracked open.
Following procedure is performed in the background during engine
start:
•
engine start mode is activated
•
avionic bus is separated from main bus
•
starter engine is engaged
•
both electric busses are unified again