Reliance electric GV3000SE, Instruction Manual

Page: 91 / 198

3 - USING THE GV3000/SE KEYPAD/DISPLAY
49'1329 e GV3000/SE 3 - 5
Programming Enable / Disable
Programming of parameters can be disabled by accessing Parameter P.051 "Programming Disable".
Note: Similar to a hardware ON/OFF switch, you need to repeat the following steps to then "re-enable"
programming. If the display indicates ‘LU’ fault, the programming of parameters is inhibited.
To Disable Programming on Local Keypad:
Action Display / Notes
1. Follow instructions for "To View or Change
Parameters in Second Menu List" LED 'Password' :
OFF = Programming Enabled ,
ON = Programming Disabled .
2. Access 'P.051' on the display. Displays shows 'P.051'.
3. Press ENTER key. Displays shows value '0' of 'P.051'
4.
Press keys
⇑
or
⇓
, until value '0026' is
displayed.
Displays shows value '0026' of 'P.051'
5. Press ENTER key to enter value. Displays shows 'P.051'. LED 'Password' :
ON = Programming Disabled . The ability to
change parameter values has been disabled.
To Enable Programming:
1.
to
4. As above ! As above !
5. Press ENTER key to enter value. Displays shows 'P.051'. LED 'PASSWORD' :
OFF = Programming Enabled . The ability to
change parameter values has been enabled.