Reliance electric GV3000SE, Instruction Manual

Page: 171 / 198

6 - VECTOR REGULATION MODE
49'1329 e GV3000/SE 6 - 21
U.045 Outer Control Loop Proportional Gain
Parameter Range: 0.10 to 128.0
Default Setting: 2.00
Refer to: U.040 OCL Feedback Source U.041 OCL Lead/Lag Select
U.042 OCL Lead/Lag Low Frequency U.043 OCL Lead/Lag Ratio
U.044 OCL Reference Gain U.046 OCL Integral Gain
U.047 OCL Trim Range Percentage U.048 OCL Proportional Trim Enable
Parameter Type: Tunable (at rest or during operation)
Description: This parameter selects proportional gain of the outer control loop PI amplifier.
See Figure 6-1c for the outer control loop block diagram.
U.046 Outer Control Loop Integral Gain
Parameter Range: 0.01 to 141.37 radians/sec
Default Setting: 2.00
Refer to: U.040 OCL Feedback Source U.041 OCL Lead/Lag Select
U.042 OCL Lead/Lag Low Frequency U.043 OCL Lead/Lag Ratio
U.044 OCL Reference Gain U.045 OCL Proportional Gain
U.047 OCL Trim Range Percentage U.048 OCL Proportional Trim Enable
Parameter Type: Tunable (at rest or during operation)
Description: This parameter selects the integral gain of the outer control loop PI amplifier.
See Figure 6-1c for the outer control loop block diagram.
U.047 Outer Control Loop Trim Range Percentage
Parameter Range: 0.0 to 100.0%
Default Setting: 0.0 (OCL output signal has no effect on speed loop reference)
Refer to: U.040 OCL Feedback Source U.041 OCL Lead/Lag Select
U.042 OCL Lead/Lag Low Frequency U.043 OCL Lead/Lag Ratio
U.044 OCL Reference Gain U.045 OCL Proportional Gain
U.046 OCL Integral Gain U.048 OCL Proportional Trim Enable
Parameter Type: Tunable (at rest or during operation)
Description: This parameter specifies the amount of control the outer control loop output signal
has on the speed loop reference. It represents a percentage of Top Speed (U.017).
See Figure 6-1c for the outer control loop block diagram.