Pg. 10
Doc ID: 191-7911A
Doc Rev: 080420
Proper orientation of the drive plates is critical for optimal clutch
performance. If you install them backwards, the clutch will still
function but will lack proper modulation performance.
4.
Add a fiction disk on top of the steel drive plate.
Some friction
disks are marked with a small colored dot. This mark is used for
processing and can be ignored.
5.
Continue alternating the steel drive plates with the friction disks
for the entire Rekluse clutch pack.
6.
Install the EXP disk on top of the last steel plate. Make sure that
the EXP disk is seated in the same slots as the clutch pack.
*Refer to the
Setup Sheet located at the back of
the manual
for the clutch pack height specifications.
