Pg. 26
Doc ID: 191-7911A
Doc Rev: 080420
7. Place the bike in
NEUTRAL
and recheck
Free Play Gain.
8. Continue to step 4 to adjust the installed
gap until the Free Play Gain of the clutch
lever is 1/8” (3 mm).
Your clutch pack will expand with heat, so
final adjustment to Free Play Gain
should be made when the bike is warm.
Remember not to ride without sufficient
Free Play Gain.
Recheck Free Play
Gain and adjust
the installed gap
Do not perform 3
rd
gear starts with this product. Starting in 3
rd
gear will burn up the clutch and decrease the performance of
this product in a short amount of time.
Step 4: Adjust the installed gap and Recheck Free Play
Gain
Once you have learned how to check Free Play Gain, you need to
finish adjusting the installed gap, then recheck the Free Play Gain
until the clutch lever moves only 1/8” (3 mm).
The gap is adjusted
by turning the slave cylinder screw.
a) With the bike running and in
NEUTRAL
, locate the adjuster
screw in the center of the adjustable slave cylinder.
b) Use a 4 mm Allen wrench to turn the adjuster screw clockwise
1 tick mark from the last setting, then recheck Free Play Gain.
