Doc ID: 191-7911A
Doc Rev: 080420
Pg. 25
3. With the engine still running, pull in the
clutch lever, then click the bike into 1
st
gear. Slowly release the clutch lever.
The bike should stay in place or have a
slight amount of forward creep.
4. With the bike idling in first gear, slowly
apply throttle to begin moving.
5. Without using the clutch lever,
accelerate moderately to approximately
5,000 RPM to fully lock up the clutch and
come to a complete stop. Repeat 10
times.
If the engine wants to stall or the creep is
excessive, the idle may be too high or
the installed gap may be too small.
Make necessary adjustments before
proceeding.
10 roll-on starts
6. Without using the clutch lever, start in 2
nd
gear, then accelerate moderately to
approximately 5,000 RPM and come to a
complete stop. Repeat 10 times.
10 roll-on starts
