Doc ID: 191-7911A
Doc Rev: 080420
Pg. 17
d) Use a 4 mm Allen wrench to turn the adjuster screw clockwise
1 full turn + 2 tick marks from your starting point.
This may
NOT be your final setting
, but it is a beginning adjustment for
finding the correct setting.
e) Continue with Step 2 to check for Free Play Gain.
Do not ride your bike without the adjusting the installed gap.
You will not be able to disengage the clutch until you set the
installed gap.
Step 2: Learn how to check Free Play Gain
Feeling Free Play Gain with the beginning adjustment to the slave
cylinder aids in learning to recognize Free Play Gain.
If you are familiar with Free Play Gain, you can skip to Step 3 -
“Break
-
in the new clutch.” If Free Play Gain is new to you, follow
the instructions below to help you learn this important step. You can
also view the video entitled “How to Check Free Play Gain”
on our
website at
www.rekluse.com/support/videos
.
Free Play Gain is different from the “normal” free play you are used
to with your stock clutch. With the Rekluse auto clutch, Free Play
Gain is the result of the EXP disk expanding and lifting the pressure
plate to engage the clutch.
Free Play Gain happens when the engine’s RPM increases from
idle to above approximately 5,000 RPM and the EXP closes the
Use the tick marks on the cylinder
and the etch mark on the screw to
remember the starting point for
adjusting the gap.
