63
jetStamp graphic
970
GB
4.3. Visual Signals (LED)
When the indicator flashes orange (warning), the status display
d
of the PCset graphic software shows a detailed device message
g
(see „Operating Interface“ Page 49).
LED indicator Condition Cause
Removal
Notes
Green
Ready
Green
Flashing
-Device is in
standby mode
- Switch off and
on again or push
trigger button
1
-Power saving mode
Orange
(warning)
Flashing,
interval of 1
- No or defective
print cartridge
- Wrong print
cartridge
- Ink level writing
error
- Print cartridge
not inserted
correctly
- Rechargeable
battery empty
- No rechargeable
battery/defecti-
ve rechargeable
battery
- Print carriage
movement
blocked
-Insert print
cartridge
-Insert print cart-
ridge correctly
-Charge recharge-
able battery
-Insert/replace
rechargeable
battery
-The detailed cause
and removal can be
determined in the
status display
d
of
the PCSet graphic
software
Orange
(warning)
Flashing,
Interval of 2
-Print cartridge
almost empty
-Check print
-Acoustic signal as
well
Orange
(warning)
Flashing,
Interval of 3
-Print cartridge
empty
-Replace print
cartridge
-Acoustic signal as
well
Orange
(warning)
Flashing,
Interval of 4
-
jetStamp graphic
970 not in the
base station
-Put the
jetStamp
graphic
970 in
the base station
- The display appears
after 30 seconds wit-
hout use for standard
ink, and after 10
seconds for MP ink.
- Acoustic signal as
well
Orange
(warning)
Flashing,
Interval of 5
-Battery nearly
flat/capacity low
-Charge/replace
rechargeable
battery
-Acoustic signal as
well
Red
(error)
Flashing,
interval of 1
-Device error
- Disconnect
device from the
power supply for
approx. 3 seconds
(including
rechargeable bat-
teries and USB
connection)
-If the error remains
after activation,
have the device
inspected by the
REINER support
