46
jetStamp graphic
970
1. Preparation and Taking into Operation
1.1. Commissioning
The rechargeable batteries must be charged completely before the first use.
The charging time is approx. 3 hours. The rechargeable batteries are charged when
the green charge display
8
goes out.
Inserting rechargeable batteries
Fig.
A
Always replace all rechargeable batteries at once. Date, time and counter reading of the
numbering machine are retained when the rechargeable batteries are removed.
f
Open battery compartment
2
.
f
Place the textile ribbon flat across the compartment.
f
Ensure correct polarity and insert the rechargeable batteries.
f
Close
2
battery compartment.
The textile ribbon serves simpler removal of the rechargeable batteries.
Charge batteries
Fig.
C
Only connect the device to the PC when the PCset graphic-Software was installed
(see Install PCset graphic Software” Page 48).
Charging at a USB hub without dedicated power supply is not possible.
f
Connect the Micro-USB socket of the device
9
to the mains unit with the USB cable and
connect the mains unit to the mains.
