47
jetStamp graphic
970
GB
1.2. Inserting Printing Cartridge
Inserting printing cartridge
Fig.
A
+
B
+
D
Depending on ink type used, different Protective Nozzle Seals are required
(see “Replace Protective Nozzle Seal” Page 67).
f
Put the
jetStamp graphic
970 in the base station
4
.
f
Turn the setting wheel
7
to position 1.
f
Keep the trigger button
1
pushed and take the device from the base station
4
.
Print carriage
3
moves to the middle position.
f
Gently push the lock of print cartridge
13
to the right, until the print cartridge flap
11
can
be opened.
f
Open print cartridge flap
11
.
f
Take new print cartridge
12
from the packaging and remove protective film from the
nozzles
15
.
f
Put the
jetStamp graphic
970 on a fixed flat surface.
f
Insert printing cartridge
12
.
f
Close the print cartridge flap
11
.
f
Push the trigger button
1
.
Print carriage
3
moves to the home position.
1.3. Test Printing
Test printing
Fig.
A
+
C
The
jetStamp graphic
970 is delivered with 4 factory-pre-set example print patterns.
WARNING
Danger of blinding in case of contact between ink and eyes.
f
Never hold the
jetStamp graphic
970 with its nozzles pointing at the face of persons!
f
Turn the setting wheel
7
to position 1.
f
Put the device on a level surface to be printed on.
f
Press the trigger button
1
.
Example print pattern 1 is printed.
