62
jetStamp graphic
970
4. Recognising and Removing Interferences
4.1.
jetStamp graphic
970 does not work
Troubleshooting
Fig.
A
+
C
f
Remove the USB cable from the
jetStamp graphic
970.
f
Open battery compartment
2
.
f
Remove the rechargeable batteries.
f
Wait for approx. 3 seconds.
f
Replace the rechargeable batteries.
f
Connect the micro-USB socket of the device
9
to the computer via the USB cable.
f
Turn the setting wheel
7
to position
1
.
f
Start the PCset graphic.
f
Check charge status display
i
(see „Operating Interface“ Page 49).
4.2. Reasons for Rechargeable Batteries Not Being Charged
-No rechargeable batteries inserted or rechargeable batteries inserted incorrectly.
-Contacts in the battery compartment defective.
-Temperature of rechargeable batteries above 40 degrees Celsius.
-Rechargeable batteries too old.
-Rechargeable batteries defective.
-Rechargeable batteries completely discharged (deep discharge).
Capacity and service life
The rechargeable batteries reach their full capacity after several charge/discharge cycles.
With increasing age, the rechargeable batteries' operating time reduces.
Rechargeable batteries are subject to wear. A longer service life than six months cannot be
warranted.
