33
3. Mounting Situation
227-10182 Fastening kit 3.4, stabilizer
rod, 2 m, for vehicles over 2240 mm
track width (dimension F),
227-101825 Stabiliser bar 2.5 m
for vehicles with excess width
227-1018 Stabiliser bar 1,5 m
227-10213 Frame extension 113 mm
for Eriba Troll model 2003
Set with 2 plates 113x230x38 mm
OHNE ABE
227-1021 Frame extensoin 200 mm,
set with 2 plates 200x230x35 mm
for frame height being too small
(dimension A),
WITHOUT ABE
227-102180 frame extension 180 mm,
set with 2 plates 185x230x35 mm
WITHOUT ABE
227-1036 Fastening kit Eriba Troll
up to model 2002
WITHOUT ABE
227-1035 Fastening kit 3.8
for models with square frame,
(e. g. Eriba Touring from model 2004)
set with 2 plates 113 x 230 x 38 mm
WITHOUT ABE (type approval)
227-1025U Clamping plate, straight for
U-profile chassis, 1 piece
Clamping plate, angled for Twin-
Versions MoveControl
227-2019 left 16 mm
227-2020 right 16 mm
227-2021 left 20 mm
227-2022 right 20 mm
Clamping plate MC Twin (for heavy
vehicles)
227-2017 angled left
227-2018 angled right
227-1191 Frame extension
for frame thickness of less than 3 mm
(dimension C) or a frame height being
too small (dimension A)
WITHOUT ABE
227-11451 Fastening kit 3.7
Jack support (Caution: a stabilizer rod
of 2 m length might be required!!) in
case of impeding jack support
L-Profile U-Profile
Floor Caravan
The chassis frames of mobile homes and trailers
are distinguished by L-profiles and U-profiles.
Depending on the mounting situation, different
fastening kits are required, which are available as
option.
Check the installation dimensions
3
of your
MoveControl by means of the table on page 4.
Never remove, modify or impair parts of the chas-
sis, of the axle suspension or of the brake gear.
In Germany, any modification of the chassis is
subject to the approval of a motorcar expert.
Please make enquiries concerning the
approval of the MoveControl and the
accessories for your vehicle regarding
your country!
Fastening kit for U-profile chassis
227-1052 + 227-1025 U
227-1037 Fastening kit 3.3 for chassis
with track width less than 1.45 m
(dimension F)
227-102191 Fastening kit 3.5
in case of overall size frame/tyres
(dimension E) too small (e. g. frames in
lightweight construction)
227-11452 Adapter spare wheel carrier
“GB”, for displacement of the spare
wheel carrier at the ALKO-chassis
227-1145 Fastening kit 3.6
for displacement of the spare wheel
carrier at the ALKO-chassis
