![background image](http://html1.mh-extra.com/html/reich/mini-brad-3486/mini-brad-3486_technical-data-spare-parts_1435007004.webp)
4 I English
3486
Karl M. Reich Verbindungstechnik
REICH ®
1
TECHNICAL DATA
Type
3486
Dimensions mm
222/240
Weight kg (without fasteners)
1.2 kg
Single sequential or contact actuation
Recommended operating pressure
range
5 - 8 bar/
0.5 - 0.8 MPa
Maximun permissible operating
pressure
8 bar/0.8 MPa
Air consumption per driving
operation
0.71 l at 7
bar / 0.7 MPa
Magazine capacity.
(No. of fasteners)
100
Penetration depth setting
yes
Lighting
yes
Fasteners: Brad nails
Brad length mm
15 - 35
Wire thickness mm
1.0 x 1.25
Recommended lubricant
1 litre special oil. Code No.
9 4420
250 cm3 grasa especial. Code No.
68 3868
2
NOISE/VIBRATION INFORMATION
Noise characteristic values *
3486
A-weighted single-event emission
sound pressure level at work
station L pA, 1s
82 dB(A)
A-weighted sound power level
L WA, 1s, d
95 dB(A)
Vibration characteristic values **
Weighted r.m.s.-acceleration (a)
2.62 m/s2
The noise level when working can exceed 85
dB (A).
Wear ear protection!
* Measured values determined according to
EN 12549:1999.
** Measured values determined according to
ISO 8662-11:1999.
3
SUPPLIED WITH
1 Mini Brad nailer
1 Tool use and safety instructions
1 Technical data sheet
1 Transport case
4
FILLING THE MAGAZINE
Only those fasteners specifi ed under technical data
(see 1) may be used.
When fi lling the magazine, hold the tool so that the
muzzle is not pointing towards own body or towards
any other person.
Do not load the tool with fasteners with the safety
yoke or trigger depressed.
Place the tool on its side. Press the locking lever (l) and
pull the magazine rail (m) back. Introduce the nails tip
downwards and push the magazine rail forward until
it locks into place.
5
FIL PENETRATION DEPTH SETTING
The penetration depth of the nail head is adjusted
using air pressure. Should this not suffi ce, a more
exact setting of the penetration depth can be achieved
by turning the setting nut (p).
Right-hand turn (U) = less penetration depth.
Left-hand turn (D) = more penetration depth.
6
SWITCHABLE ACTUATION
-SINGLE TRIGGER RELEASE/RELEASE ON CONTACT-
A setting wheel on the trigger (s) can be turned to set
the type of actuation either to single trigger release
or release on contact (see symbol).
7
ACCESSORIES
Code No.
Balancer for 10 - 20 N (1.0 - 2.0 kp),
cable travel 1.6 m (5.2 ft).
40 3393