Make sure that you never exchange
the Positive (+) and Negative (-) of
the electricity supply!
Now connect the 10 mm² cables to the
battery
. The electrical installation is now
completed.
If the D-Plus signal of the vehicle has been
connected to the contact and a signal is supplied,
the MoveControl cannot be started. This kind of
safety circuit prevents any operation being not
appropriate.
Fix the housing lid of the Basic Station.
Mount the
antenna cable
in accordance with the
notes on the Basic Station. If the radio signal
reception is poor, then you extend the
antenna to 54 cm The cable should be taken
outside the vehicle taking care that the aerial
does not come into contact with any metal parts.
5. Installation electrical
l
GB7
Make sure that all cables are installed properly,
solidly and without any friction.
Carefully seal any holes with suitable sealing
material, from the inside and the outside.
E5 Basic
station
E6 Connection D-Plus (Safety circuit)
E7 Connection
battery
English
327-130230S1 - 0902_MCC_MBA RC2_7 7
18.03.2009 14:36:37
