Reich Kupplungen MMS-T W Series, Operating Instructions Manual

Page: 44 / 52

Maintaining the coupling
44
Where necessary, use suitable tools for this purpose.
Retain the saddle elements (4) in a suitable container for subsequent disposal.
Repeat these steps until all saddle elements are removed.
Proceed as follows to mount the new saddle elements (4):
Place a saddle element (4) on top of a coupling claw so that its belt points to the
hub body on the opposite side. It may be necessary to place the saddle element
on top at an angle.
Firmly press the saddle element (4) onto the coupling claw.
Where necessary, use suitable tools such as a rubber mallet.
Repeat these steps until all saddle elements are mounted.
Slip the retaining cap (2) onto the hub body (3).
Fasten the retaining cap (2) using the bolts (1).
Tighten the bolts crosswise with the necessary torque, see page 32.
Mark the bolts which have been tightened to the required torque in colour.