Reich Kupplungen MMS-T W Series, Operating Instructions Manual

Page: 27 / 52

Mounting the coupling
27
In the pre-assembled condition, the coupling parts are bolted together but not to the
required torque. The pre-assembled condition can be recognised by the red tag or
adhesive label attached in the factory.
CAUTION!
Property damage due to improperly fastened bolts.
When using a screw locking compound, for example an
adhesive, the required torque must be adapted under
circumstances.
Observe the specifications of the screw locking compound
manufacturer for any changed tightening torques.
Tighten the bolts crosswise with the necessary torque, see page 32.
Mark the bolts which have been tightened to the required torque in colour.
In the fully assembled condition, the coupling element and the coupling hub are
bolted to the required torque. The fully assembled condition can be recognised by the
markings made on each bolt in the factory.