Reich Kupplungen MMS-T W Series, Operating Instructions Manual

Page: 38 / 52

Putting the coupling into operation
38
Putting the coupling into operation
WARNING
Danger to life due to rupturing of a damaged coupling.
Exclusively operate the coupling in flawless condition.
Make sure that the coupling is equipped with a protection
device which is capable of withstanding rupturing of the
coupling.
Wear the personal protective equipment specified by the owner.
Perform the following work prior to commissioning:
Make sure that all bolted connections are tightened to the required torque.
Check the alignment of the coupling.
Correct the alignment if necessary.
Make sure that a protection device is mounted and functional.
Proceed as follows to commission the coupling:
Start the drive unit as specified by the owner.
Check the coupling for low-noise and vibration-free running.
If this is not the case, shut the drive unit off as specified by the owner.
Search for the cause of the malfunction.
Eliminate the malfunction.
Repeat commissioning.