7
│
Installation and Operation Manual RTC 12i - www.regulus.eu
3.4. Placement of the heat pump
a) Installation on concrete blocks
The heat pump is placed on the
legs at the factory and flexibly
mounted on anti-vibration rubber
silent blocks. The heat pump
supplied in this way shall be
installed on concrete blocks. The
foundations of concrete blocks
should reach a frost-free depth.
The heat pump is placed on the
prepared foundation structure
and levelled with a spirit level
so that it is placed perfectly
horizontally. It is not necessary
to anchor the heat pump to the
base or to the outer wall of the
building.
b) Installation on wall brackets
The other option is to place
the heat pump on the house
structure using wall brackets
(code 17458).
Before mounting the bracket
on the wall, it is important to
verify its load-bearing capacity.
Depending on the composition
and thickness of the wall, it is
recommended to use a chemical
anchor or a through-wall anchor
for installation.
The brackets are galvanized and
the complete support is supplied
including steel ropes ensuring its
spatial rigidity.
Follow the instructions for the
wall mounting brackets.
Prior to placing the heat pump
on the brackets, unscrew the
silent blocks (30 mm high) that
come with the heat pump from
production and replace them
with silent blocks designed for
brackets (40 mm high). These
silent blocks are included in the
supply of wall mounting brackets.
Level the heat pump with a spirit
level so that it is placed perfectly
horizontally.
Wall brackets (code 17458)
condensate
drain
Ø
40 mm
condensate
tray
concrete
blocks
coarse crushed stone,
32-63 mm
frost-free
depth
moisture barrier
condensate
drain
Ø
40 mm
condensate
tray
condensate drain
Ø
40 mm
condensate drain
Ø
40 mm
P-trap
