5
│
Installation and Operation Manual RTC 12i - www.regulus.eu
3. CONSTRUCTION READINESS & INSTALLATION
The installation may only be carried out by a person with a valid manufacturer‘s authorization. If any
of the subsidy titles are used to acquire a subsidy for the heat pump (e.g. boiler subsidies, or the New
Green Savings program), the installation company must meet the requirements of current legislation.
3.1. Scope of supply
-
RTC 12i
Heat Pump
-
Installation and Operation Manual
-
2 compensators to protect the heat pump heat exchanger against frost rupture
-
2 G 1“M nipples incl. gaskets
3.2. Installation preparation and transport
The installation must be carried out by a qualified person in accordance with the applicable stan
-
dards and all regulations concerning occupational safety must be observed.
-
The heat pump shall be transported and stored in an upright position only.
-
Check that the product has not been damaged in transit. Report any transport damage to the
carrier.
-
Transport the unit to the installation site before removing the packaging.
-
Move the product with a pallet truck or forklift if possible.
-
It is possible to use lifting straps tied around the pallet, however only if the packaging (the
wooden frame) had not been removed.
-
MIND THE DIFFERENT WEIGHT OF THE RIGHT AND LEFT SIDE OF THE HEAT PUMP!
