RC500EX
|
53
installation
919-881
07.04.18
8. Ensure Logs 2 & 3 are still connected after installing onto the burner.
From the left side - push left side of Log 1 forward until it is touching
the back of Log 2.
9. Install Log 4 on the burner by lining up pin locators on the log with 2
pins on the burner.
2
3
1
5
5
4
4
10. Placement of Log 4.
Log 1 - push left side forward to touch Log 2
Log 4 - install onto pins on burner
Log 5 - install
Log 5 - placement
Glass crushed glass on burner
Log 4
11. Install Log 5 - place darker end of the log into the triangle created
by Logs 1,2 & 3. Gently place the other end of the log onto the pin
on the burner.
12. Placement of Log 5.
13.
Important
: Spread the 3/4 Black Crystal glass over the burner evenly
to create a good flame. Space the crushed glass out, do not overload.
Use only 3lb of the 3.5lb bag of crushed glass.
2
RC500E
Summary of Contents for Contura RC500EX
