50 |
City Series CB40E-12
installation
919-668b
08.09.17
2
CITY SERIES
6. After installing supplied feet tilt assembled hearth over 90
º
.
8. Slide assembled hearth into position around unit.
10. Remove outer base panels from unit, then secure hearth to unit with 4
thumbscrews with lock w washers (installed from inside the unit)
in locations shown in above diagram.
Tip hearth back onto feet/bottom
7. If using hearth panel kit/glass hearth top, remove removable trim (5 pieces)
from the unit prior to sliding hearth into position. Loosen screws from inside
the unit to remove trim.
UHPRYDEOHWULP
UHPRYDEOHWULP
9. Temporarily place the hearth top fi nishing materials on top of the hearth
and adjust height of the hearth by adjusting the leveling legs to ensure that
the hearth top fi nishing materials line up with the outer base panels on the
appliance or the removable trim if left in place (see step 7). This must be
level at front and both sides.
Thumb
Screw
Lock
Washer
Washer
Flush
Summary of Contents for CB40E-LP12
Page 106: ...106 City Series CB40E 12 warranty ...
Page 107: ......