Regency Bellavista B36XTE Owners & Installation Manual Download Page 34

Page: 34 / 76

Bellavista® B36XTE-10 Gas Fireplace

installation

Pipe Length

Vertical

Termination

Cap

Storm Collar

Flashing

Ceiling Firestop

Rigid Pipe Adaptor

Pipe

Length

Pipe Length

90 Elbow

Astrocap

(946-523/P)

Wall Thimble

Vinyl Siding

Standoff (Optional)

Reducer

(4 x 6-5/8 venting)

(1092 mm)

HORIZONTAL OR VERTICAL TERMINATIONS

RIGID PIPE 4" X 6-5/8"

(MUST USE REDUCER PART # 946-606 & 770-994 RIGID PIPE ADAPTOR)

The minimum components required for a basic horizontal termination using 4" x 6-5/8" are:

1 Rigid Pipe Adaptor (770-994)

1 Reducer (946-606)

1 90

Elbow

1 Wall Thimble

1 Length of pipe to suit wall thickness

1 Horizontal Termination Cap

Wall thickness is measured from the back standoffs to the inside mounting surface of termination cap. For siding other than vinyl furring strips

may be used, instead of the vinyl siding standoff, to create a level surface to mount the vent terminal. The Terminal must not be recessed into

siding. Measure the wall thickness including furring strips.

If a Vinyl Siding Standoff is required (it must be used with vinyl siding), measure to outside surface of wall without siding and add 2 inches.

Note:

The 4" x 6-5/8" Regency Flex Kits (946-515 & 946-516) are not approved for use with this fireplace. Only rigid pipe may be used

when 4" x 6-5/8" is used.

The FPI AstroCap

and FPI Riser Vent terminal are certified for installations using FPI venting systems as well as Simpson Dura-Vent

Direct Vent,

American Metal Products, Security Secure Vent

, AmeriVent Direct Vent, ICC Excel. AstroCap

is the proprietary trademark of FPI Fireplace Products

International Ltd. Dura-Vent® and Direct Vent are registered and/or proprietary trademarks of Simpson Dura-Vent Co. Inc.

This product has been evaluated by Intertek

for using a Rigid Pipe Adaptor in conjunction

with DuraVent Direct Vent, Selkirk Direct-Temp,

Ameri Vent Direct Vent, Security Secure Vent

and ICC Excel Venting Systems. Use of these

systems with the Rigid Pipe Adaptor is deemed

acceptable and does not affect the Intertek WHI

listing of components.

WARNING:

Do not combine venting components from

different venting systems.

Exception: However, use of the AstroCap

and

FPI Riser is acceptable with all systems.

(279mm)

ASTROCAP # 946-523/P

DIMENSIONS

Summary of Contents for Bellavista B36XTE













































































Search results

Summary of Contents for Bellavista B36XTE

Reviews:

Related manuals for Bellavista B36XTE

Brands by name

Popular brands

Regency Bellavista B36XTE, Owners & Installation Manual

Search results

Summary of Contents for Bellavista B36XTE

Reviews:

Related manuals for Bellavista B36XTE

Brands by name

Popular brands