Bellavista® B36XTE-10 Gas Fireplace
|
15
|
15
installation
FRAMING WITH VIGNETTE AND VIGNETTE TRIM FINISHED FLUSH
M
N
O
Q
P
R
U V
T
Opening for gas
connection
11" (279mm)
dia. Hole through
wall Vent.
Non-Combustible
Header
(steel stud) on edge
Drywall
(or other
facing)
W
Non-Combustible Facing
S
S
Non-Combustible
Header
(steel stud)
on edge
Framing Dimensions
Description
B36XTE
M
Framing Width
42-1/4"(1073mm)
N*
Framing Height
42" (1067mm)
O (Rear Vent)
Framing Depth - Rear Vent
22-1/8" (559mm)
O (Top Vent)
Framing Depth - Top Vent
21-7/8" (553 mm)
P (Top Vent)
Corner Facing Wall Width
51 - 5/16" (1303mm)
P (Rear Vent)
Corner Facing Wall Width
55-11/16" (1414mm) AstroCapXL
64-3/16" (1630mm) - other approved caps
Q (Top Vent)
Corner Facing Wall Width
72-1/2" (1842mm)
Q (Rear Vent)
Corner Facing Wall Width
78-3/4" (2000mm) AstroCapXL
90-3/4" (2305mm) - other approved caps
R (Rear Vent)
Framed Chase Ceiling - Rear
42" (1067mm)
R (Top Vent)
Framed Chase Ceiling - Top
50-1/2" (1283mm)
S (Rear Vent)
Vent Centerline Height - Rear
26-1/2" (673mm)
S (Top Vent) (5" x 8")
Vent Centerline Height - Top
42-1/8" (1070mm) Flex
44-1/4" (1123mm) Rigid
S (Top Vent) (4" x 6-5/8")
Vent Centerline Height - Top
-
49" (1245mm) Rigid
T
Gas Connection Height
1-1/2" (38mm)
U
Gas Connection Inset
4-1/8" (105mm)
V
Gas Connection Width
3-1/4" (82mm)
W
Non-combustible Height
8-3/4" (222mm)
*NOTE: When using the optional Vignette finishing trim, this can be installed as a 3-sided or 4 sided finish trim. If choosing to use this as a 4 sided finish trim
the framing would need to be increased by 11/16" inches minimum in order for this to fit. This
must be to the finished floor. (Eg :42" framing 11/16" to bottom of 4-sided finishing trim +1/2 thick finished floor = 43 3/16
** Important: Framing height requires consideration of the hearth depth. Dimension N = N + the thickness of the installed hearth.
Vi Vignette Finishing Trim Finished Flush
