38
|
Regency
®
CLASSIC™ C34E-11 Direct Vent Freestanding Gas Stove
installation
DOOR INSTALLATION
C34E-11
03.01.19
920-076
1.
Door will be packaged with door retaining clip facing inwards (Diagram 1).
DOOR INSTALLATION
Diagram 1
3.
Install slotted brackets (found in the manual pack) to the back of the door
with two (2) screws on each side as shown in Diagram 3.
4.
Attach door handle to door by installing the handle through the hole on
the left upper corner (Diagram 4). Position the handle in the 8 O-clock
positions, then tighten with 14mm (9/16”) wrench.
Diagram 2
2.
Unscrew and turn the door retaining clip outwards, then re-tighten the
screw (Diagram 2).
Door Handle Assembly
Diagram 3
Before
After
5.
Place the door onto the door hinges. Put the hinge cover caps on top of
hinges to complete the door (Diagram 5).
Safety Screen Installation / Removal
Diagram 4
Note:
The bottom of the door may scrape the ash lip. In this case place the
spacers provided on the door hinges of the unit before placing the door.
Diagram 5
