Regency
®
CLASSIC™ C34E-11 Direct Vent Freestanding Gas Stove
|
49
maintenance
13. Disconnect the blower power wires from the IFC board. Disconnect
red from white wire and black from black wire as shown below.
14. Loosen six (6) Phillips head valve mounting screws from inside of
firebox.
15. Drop valve assembly down and through Cover plate opening.
16. Disconnect the stepper motor from the IFC board located at X6 on
the IFC board.
17. Once the stepper has been disconnected, remove the power cord
connection on the IFC board at location X1.
18. Remove the IFC board from the mounting bracket by removing one
(1) Phillips head screw. Then slide the IFC board left and out.
