Reflex Marine FROG-9, User Manual

Page: 39 / 64

User Manual FROG-9
Rev 05 Page39
Post Load Test Visual Inspection Checklist Form
Unit No This Inspection Date
Usage Category Load Test Date
Installation / Vessel Load Test Report / Cert No
Avg No of Transfers / Year Load Test Authority
Inspect
No Description Comment Pass /
Fail
1. Main Lift-Eye Plug (Critical Part)
Visually inspect in situ for any signs of wear, cracks,
deformation or other damage.
2. Main Lift-Eye Plug M24 Bolts (Critical Part)
Visually inspect the three M24 lLift-Eye bolts, nuts, split
pins and tamper proof seals that connect the main lifting
eye plug to the central column (through the lifting bolt
retaining sleeve) for wear or damage.
3. Back-Up Lift-Eye
Visually inspect for any wear or damage and check that
the split pin and tamper proof seal are intact.
4. Handling Lift-Eye
Visually inspect for any wear or damage and check that
the split pin and tamper proof seal are intact.
5. Seat Base Assembly and Hydraulic Damper and
Anti-Tilt Assembly
Visually inspect for any wear or damage and ensure that
all bolts, clevis’ and other fasteners are fully secure.
6. M72 Keel Boss and M10 Cross Bolt (Critical Part)
At the bottom end of central column, visually inspect the
M72 keel boss nut and ensure that the M10 cross bolt is
secure c/w split pin and tamper proof seal. Do not go
underneath an active lift.
7. Frame and Buoyancy
Visually inspect frame for any deformation, cracks
bending and ensure that all bolts and fasteners are fully
secure.
8. Photographic Report
As an inspection record aid, the critical elements and
condition of the unit may be recorded in photographs;
Photographs of each of the 7 points of the check list
would provide a concise inspection record. Photographs
should be clearly marked pre and post inspection as
appropriate.
9. Documentation / Report
Complete an inspection report on the above which
should be signed and dated by a Competent Person.
NOTES:
Link to Index