Reflex Marine FROG-9, User Manual

Page: 31 / 64

User Manual FROG-9
Rev 05 Page31
6.5 Visual Inspection
Question Response
When must a Visual
Inspection be conducted? A Visual Inspection must be conducted at the recommended
frequency in Table 3. This frequency may be as long as every 6
months or as short as every 3 months according to usage.
Who must conduct this
inspection? A Competent Person.
Does this inspection
require a formal record?
Yes.
What drawings are
required to support this
inspection?
Drawing No Revision Description
HC9-CC-A1 E Load Path Assembly
HC9-SE-A1 C Seating Assembly
HC9-GA-02 E Central Column Assembly
The above diagrams are available in
Appendix B .
What equipment is
required to perform this
inspection? i. A ladder.
ii. An inspection frame or floor matting.
iii. Good lighting.
A suitable means of safely accessing the top and the bottom parts of
the FROG-9 is required. When using a step ladder or ladder it must
be securely fixed to prevent slippage whilst accessing the top of the
FROG. The FROG-9 can be laid on its side on protective matting, or
the use of a secure inspection frame assembly to safely access the
underside of the FROG-9 is recommended. Do not go underneath an
active lift.
Be aware that in some regions “Working at Height” regulations may
apply.
The following checklist is suggested as a suitable list of required inspection items and a suitable
format for recording key inspection data. A
‘ WORD ’ and ‘EXCEL’ copy of this inspection checklist is
included on the distributed CD’s and is also available on the Reflex Marine Ltd website at
www.reflexmarine.com/support .
Link to Index