REER S.p.A. - Via Carcano, 32 - 10153 Torino, Italy - Internet: www.reersafety.com - e-mail: [email protected]
77
8541205 - rev
.1 - 02/09/2019
Configuration software
PARTIAL MUTING
A SAFEGATE function concerns the possibility of limiting the muting function to a number of well-defined
beams (from the first beam).
This function, called Partial Muting, has the following features:
Î
Î
It can only be enabled with the Safegate Configurator SOFTWARE:
(Tick on "Partial Muting Enabling").
Î
Î
The first beam of the Partial Muting always starts from the bottom (connection side).
Partial Muting with Enable
When Partial Muting with ENABLE is selected after a "PARTIAL Muting" signal rising before the start of the
Muting cycle, SAFEGATE enables the Partial Muting function only for the first n beams (2 in the example).
Partial Muting with Disable
When Partial Muting with DISABLE is selected, SAFEGATE enables the Partial Muting function only for
the first n beams (2 in the example).
Only after a "PARTIAL Muting" signal (rising edge) occurs before the start of the Muting cycle will the
Muting Normal cycle be enabled.
Partial Muting: MONITOR
At this stage we have a dynamic reading of the
SAFEGATE condition.
In particular, are highlighted:
¾
A graphic representation of the curtain, with
integrated lamp with colour in real time.
¾
A graphic representation of the signalling
label.
¾
A graphical representation of the curtain, with
highlighted beams for Partial muting function.
Î
Î
Pay attention to the two highlighted zones in the boxes: in the example, the Partial muting option for
the first 10 beams was selected. THE BEAMS WITH Partial Muting FUNCTION ARE HIGHLIGHTED IN
YELLOW, WHILE GREEN COLOURED BEAMS WORK NORMALLY: ACTIVE CURTAIN.
