7
REER S.p.A. - Via Carcano, 32 - 10153 Torino, Italy - Internet: www.reersafety.com - e-mail: [email protected]
8541205 - rev
.1 - 02/09/2019
Safety
SAFETY
SIMBOLOGY
This symbol indicates an important warning for personal safety. Failure to comply with this warning
may result in high level risk for exposed personnel.
Î
This symbol indicates an important warning for the proper operation of the curtain.
PRECAUTIONS
The operations indicated in this document must only be carried out by qualified personnel. Such
personnel must have the necessary requirements to be able to operate on the electronic equipment
to be installed in order to avoid any risky situation.
REER declines any liability for malfunctioning of equipment installed by unqualified staff.
Any use other than those indicated in this manual may be considered as potentially dangerous for
the installer and the machine operator.
For safety reasons, please contact your country’s safety authorities or the relevant industry
association if necessary.
For applications in the food industry, consult the manufacturer to verify compatibility between
curtain materials and chemical agents used.
The protective function of optoelectronic safety devices is not effective in cases where:
¾
The machine stopping device cannot be actuated electrically and it is not possible to stop all dangerous
machine movements immediately and at any time during the operating cycle.
¾
The hazardous condition is associated with the falling of objects from above or ejection of these from
the machine.
¾
Anomalous forms of light radiation are present (for example, use of cablelless control devices on cranes,
radiation from weld spatter, etc). In this case additional measures may be necessary to ensure that the
ESPE does not fail to danger.
Î
The strict and complete observance of all the standards, indications and prohibitions set forth in this
manual is a prerequisite for its proper operation.
REER S.p.A. therefore, declines any liability in case of non-respect, even partial, of these indications.