Reer SAFEGATE MAL2P TRX, Installation, Use And Maintenance Manual

Page: 51 / 82

51
REER S.p.A. - Via Carcano, 32 - 10153 Torino, Italy - Internet: www.reersafety.com - e-mail: info@reer.it
8541205 - rev
.1 - 02/09/2019
Electrical connections/Operating modes
Table 7
MAIN MALE CONNECTOR – M12- 12-PIN
PIN COLOUR SIGNAL IN/OUT DESCRIPTION ELECTRICAL LEVEL
1 White OSSD1 Output STATIC SAFETY OUTPUT PNP active high
2 Brown 24VDC - POWER SUPPLY 24VDC -
3 Green OSSD2 Output STATIC SAFETY OUTPUT PNP active high
4 Yellow EDM Input K1/K2 FEEDBACK Feedback from external counters
5 Grey SEL_A Input
OPERATING MODE
CONFIGURATION
Refer to the table “SELECTION OF
OPERATING MODES”, page 51
6 Pink SEL_B Input
OPERATING MODE
CONFIGURATION
Refer to the table “SELECTION OF
OPERATING MODES”, page 51
7 Blue 0VDC - POWER SUPPLY 0VDC -
8 Red PE - EARTH CONNECTION
Î
When connecting high inductive loads to OSSDs, use suitable voltage suppressors on the outputs.
In free protected area conditions, the Active element provides a voltage of 24VDC on BOTH outputs.
Therefore, the established load must be connected between BOTH output terminals and the 0VDC.
Table 8
SELECTION OF OPERATING MODES
CONNECTIONS OPERATION
EXT_SEL_A (PIN 5)
connected to :
ext_OSSD1 (PIN 1)
EXT_SEL_B (PIN 6)
connected to :
ext_OSSD2 (PIN 3)
EXT_K1_K2 (PIN 4)
connected to :
0VDC
AUTOMATIC
no EDM
EXT_SEL_A (PIN 5)
connected to :
ext_OSSD2 (PIN 3)
EXT_SEL_B (PIN 6)
connected to :
ext_OSSD1 (PIN 1)
EXT_K1_K2 (PIN 4)
connected to : 24VDC
(through series of contatcts N.C. of external relays)
AUTOMATIC
with EDM
EXT_SEL_A (PIN 5)
connected to :
24VDC (PIN 2)
EXT_SEL_B (PIN 6)
connected to :
24VDC (PIN 2)
(through the RESTART pushbutton)
EXT_K1_K2 (PIN 4)
connected to :
0VDC
MANUAL
no EDM
EXT_SEL_A (PIN 5)
connected to : 24VDC (PIN 2)
(through the RESTART pushbutton)
EXT_SEL_B (PIN 6)
connected to :
24VDC (PIN 2)
EXT_K1_K2 (PIN 4)
connected to : 24VDC
(through series of contatcts N.C. of external relays)
MANUAL
with EDM