26
5. Scope of Delivery
• Ship’s body with removable hull deck
• Boat stand
• Operating instructions
Required for operation (not enclosed, must be ordered separately):
• 2-channel remote control (2.4 GHz recommended)
• Batteries/rechargeable batteries for the transmitter
• High-performance receiver battery (e.g. 5-cell hump-pack)
• Charger for the receiver battery
• Propellant (two-cycle mixture 1:25)
• Tank bottle or electrical propellant pump for model vehicles
• Steering servo (at least 200 Ncm actuating power)
• Throttle servo (at least 40 Ncm actuating power)
• We also recommend keeping one or several replacement ship propellers ready.
Required for setup of the model (not enclosed):
• Double-sided adhesive tape (e.g. servo tape or hook-and-loop tape) for attaching the receiver
• Various tools (e.g. screwdriver, cutter knife)
• Viscous superglue or 5-minute epoxy resin
See our catalogues at www.conrad.com for tried and tested accessories.
6. Safety Information
In case of damage caused by non-compliance with these operating instructions, the warranty/
guarantee will expire. We do not assume any liability for consequential damage!
We do not assume any liability for damage to property or personal injury caused by improper use or
the failure to observe the safety instructions! In such cases the warranty/guarantee will expire.
Warranty and guarantee also shall not cover normal wear and accident damage (e.g. broken ship propellers
or drive or remote control parts with water damage).
Dear customer, these safety instructions are not only for the protection of the product but also for your own
safety and that of other people. Therefore, read this chapter very carefully before taking the product into
operation!
