32
• Before commissioning, check the trim button settings for direction control and adjust them if required.
• Always check the correct and secure position of the propeller before operation.
• Make sure that no objects, clothes or body parts are in the range or the suction area of the rotor while it is rotating.
c) During Operation
• Do not take any risks when operating the product! Your own safety and that of your environment depends completely
on your responsible use of the model.
• Improper operation can cause serious damage to people and property! Therefore make sure to keep a sufficiently
safe distance from persons, animals or objects during operation.
• Select a suitable room or suitable flight area to operate your model. We recommend a warehouse or gym for your
first flight attempts. If you use the model in the outdoor area, choose a windstill or low-wind day.
• Only fly your model if your ability to react is unlimited. The influence of tiredness, alcohol or medication can cause
incorrect responses.
• Do not fly directly towards audience or yourself.
• Motor, flight controller and flight battery may heat up during operation of the model. For this reason, wait for 5 to
10 minutes before recharging or replacing the flight battery. The drive motor must have cooled down to ambient
temperature.
• As long as the model is in operation you must always leave the transmitter switched on. After landing, always dis
-
connect the flight battery from the model completely first. Only then may the transmitter be switched off.
• In case of defect or malfunction, remove the cause of the interference before starting your model again.
• Never expose your model or the transmitter to direct sunlight or excessive heat for an extended period of time.
• After use, the flight battery must be disconnected from the model and the transmitter switched off. Remove the
batteries from the transmitter for extended storage.
