42
b) Switching on the Transmitter
Move the control stick for the pitch and tail functions (also see
figure 1, item 8) to the bottom position right at your body.
Slide the function switch (also see figure 1, item 10) from the left
position „OFF“ to the right position „ON“.
The transmitter emits a short signal sound and the LED display
(also see figure 1, item 11) lights up red.
The red LED display flashes if the control stick for the
pitch and tail functions is not in the bottom position when
switching on. The four trim indicators in the display are
set to stop and the transmitter signal icon flashes.
Attention!
If the power supply is no longer sufficient for intended operation of the transmitter (below 7.1 V), the LED
display (also see figure 1, item 11) starts to flash. If the supply voltage drops below 6.3 V, the battery icon in
the display flashes and the transmitter emits a short warning sound at regular intervals.
In this case, terminate flight operation of the model immediately And insert a new set of batteries in the
transmitter.
Figure 3
Summary of Contents for Exceed
Page 130: ...130 ...
Page 131: ...131 ...
