REDT R&D MAGIC-70 Manual Download Page 16

Page: 16 / 128

◈

Description on Menu

If press the

button, entering to the menu mode. It is same function of operation keys. Press and hold the

button

for more than 3 seconds to enter each menu.

Exchange the tools.

Check XY coordinate.

※

If the machine is restarted, set value is reset.

Check Z coordinate.

※

If the machine is restarted, set value is reset.

Check A coordinate.

※

If the machine is restarted, set value is reset.

Select the measurement

option the material’s height.

Surface Height/ Horizontal, Shape

Verticality, Shape/ Surface Slope

When repetitive work, Select

the measurement option of

material height and engraving

area.

1. Skip the all measurements.

2. Measure the height.

3. Check the all measurements.

Select how to check the

engraving area before starting

to engrave ring inner diameter.

Spindle test is running.

Summary of Contents for R&D MAGIC-70

































































































































Search results

Summary of Contents for R&D MAGIC-70

Reviews:

Brands by name

Popular brands

REDT R&D MAGIC-70, Manual

Search results

Summary of Contents for R&D MAGIC-70

Reviews:

Brands by name

Popular brands