REDT R&D MAGIC-70 Page 122 Manual Download

Page: 122 / 128

121

1. Turn the clamp knob on the left side of the clamp and pull the clamp and spacer block to take it out.

2. Fix a ring on flat surface of the rotation clamp. (Ring Outer Diameter Max.18mm)

3. Press the

button and go to the expert menu mode.

4. Press

button, and when

menu appears on the LCD window, then press

and hold

button until it beeps (more than 3 seconds) to run the menu.

5. Select the “

4.Pointer/Rotary

” then press and hold

button until it beeps (more than 3 seconds) to run

the menu.

6. The tool draws cross (+) on the materials, and the laser pointer is turned on.

7. Use the

direction key to move the laser pointer to the center of the cross, and press

and hold

button for more than 2 seconds to save the settings.

8. Laser pointer moves closer to the material to accurately calibrate the laser pointer’s origin.

Move the laser pointer to the center of the cross by using the

direction key on engraver,

and press and hold the

button until it beeps (more than 3 seconds) to confirm that the setting is saved.

Summary of Contents for R&D MAGIC-70

































































































































Search results

Summary of Contents for R&D MAGIC-70

Reviews:

Related manuals for R&D MAGIC-70

Brands by name

Popular brands

REDT R&D MAGIC-70, Manual

Search results

Summary of Contents for R&D MAGIC-70

Reviews:

Related manuals for R&D MAGIC-70

Brands by name

Popular brands