manualshive.com logo in svg

REDONDO RS, User Manual

Share
Download
REDONDO RS User Manual Download Page 7

6

PRECAUTIONS

PLEASE OBSERVE THESE PRECAUTIONS  

WHEN INSTALLING AND USING THIS UNIT:

This user’s manual does not cover all possible installation scenarios. 
If you feel you can’t install this unit yourself, please take it to a 
local car audio professional. Feel free to contact us if you have 
questions about installing your radio.

• Do not disassemble, modify or attempt to repair 

the unit yourself. If the unit needs to be repaired, 
consult your dealer or Retro Manufacturing, LLC.

• Do not use the unit when it is out of order. If the 

unit is out of order or is in an abnormal state (has 
foreign objects in it, is exposed to water, is smoking 
or smells), turn it off immediately, remove power and 
consult your dealer or Retro Manufacturing, LLC.

• Refer fuse replacement to qualified service personnel. 

If a fuse blows, eliminate the cause and have it 
replaced by a qualified service technician with the 
fuse prescribed for this unit. Incorrect replacement of 
the fuse may lead to fire and damage the unit.

• If the unit does not turn on, check all the connections first. 

Then check the fuse in your vehicle’s fuse box and the fuse 
at the unit’s wiring harness. Do not expose the unit to direct 
sunlight or excessive heat. Excessive heat will raise the 
interior temperature of the unit, which may damage it.

• Do not use the unit where it is exposed to moisture or 

dust. Exposure of the unit to moisture or dust may lead 
to smoke, fire or other damage to the unit and will void 
your warranty. Make sure the unit does not get wet 
in car washes or on rainy days. Exposure to moisture 
will damage the unit and void your warranty.

Summary of Contents for RS





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands