manualshive.com logo in svg

REDONDO RS, User Manual

Share
Download
REDONDO RS User Manual Download Page 27

26

OPERATING YOUR REDONDO RS

Display Color (SCAN)

This sub-menu changes the display color. The default setting is 

SCAN

, 

which will scan through all of the available colors. To customize your 
display color, look for the word 

SCAN

 in the sub-menu (if a custom 

color has already been chosen, look for that color name in the 
sub-menu), then rotate the right-front knob (#8) to select one of the 
preset colors: 

white

, 

green 1

, 

green 2

, 

green 3

, 

orange

, 

red

, 

pink

, 

purple 1

, 

purple 2

, 

blue 1

, 

blue 2

, 

user, Scan

. 

To create a custom color, select 

USER

 in the preset color menu, then 

press the right-front knob (#8) once. This will allow you to edit the 
RGB values for 32,000 color variations. Rotate the right-front knob 
(#8) to adjust the reds, then press the same knob (#8) to move to 
the greens. Repeat this process to adjust the greens and the blues.  

NOTE: If you lower all RGB settings down to “00” the display will go black, and you will 
need to reset the radio by disconnecting all power from the unit for 2 minutes. This will 
reset your radio back to the factory defaults. 

Dimmer

This sub-menu adjusts the radio’s display brightness between high 
(

DIMM HIGH

), mid (

DIMM MID

) and low (

DIMM LOW

).

Bluetooth

®

 ON/OFF (BT)

This sub-menu toggles Bluetooth

®

 on or off. Bluetooth

®

 must be 

enabled in order to connect a Bluetooth

®

 device for hands-free 

operation or streaming audio. 

Bluetooth

®

 Connect/Disconnect

This sub-menu enables the radio to be discoverable on your 
Bluetooth

®

 device. Choose 

BT CONNEC

 to allow your device to connect, 

and 

BT DISCON

 to disable Bluetooth

®

 connections. To connect your 

device, choose 

BT CONNEC

, then search for “RETROSOUND” in your 

phone’s Bluetooth

®

 device list. Enter password “0000” if prompted. 

Summary of Contents for RS





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands