manualshive.com logo in svg

REDONDO RS, User Manual

Share
Download
REDONDO RS User Manual Download Page 34

33

OPERATING YOUR REDONDO RT

Balance

This sub-menu (

bal

) adjusts stereo sound to the left or right. This may 

be helpful in compensating for the position of the driver in relation to 
the vehicle’s speakers. Adjustment range is from 0-12 between the 
left and right speakers.

Fader

This sub-menu (

fader

) adjusts the sound between the front and 

rear speakers. Adjustment range is from 0-12 between the front 
and rear speakers.

XBAS

This sub-menu (

XBAS

) boosts bass and treble for listening at low 

volumes. This should only be used at low volume levels and should be 
set to 

XBAS OFF

 at high volumes.

Subwoofer ON/OFF*

This sub-menu (

SUB

) toggles the subwoofer RCA output on or off. 

Subwoofer Volume*

This sub-menu (

SUB VOL

) adjusts the volume of the subwoofer 

between 0-12. 

Subwoofer Crossover Frequency*

This sub-menu (

Sub 120H

) adjusts the frequency crossover point of the 

subwoofer between 80Hz, 120Hz or 160Hz.

Bass Crossover Frequency

This sub-menu (

BAS 80H

) adjusts the frequency crossover of the bass-

tones between 60Hz, 80Hz, 100Hz or 200Hz. 

*The Subwoofer sub-menus will only appear when a subwoofer is attached  
and 

SUB ON

 is selected in the Subwoofer menu.

Summary of Contents for RS





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands