11
INSTALLATION INSTRUCTIONS
STEP 3: Install InfiniMount Main Brackets
Attach each InfiniMount bracket to the correct side of the radio
using the supplied screws. It may be necessary to adjust the
brackets forward, backward, up or down before tightening the
screws (see Figure 3). If needed, you may rotate, bend or cut
the InfiniMount brackets to achieve the proper fit. Complete the
assembly with at least two screws tightened on each side.*
*In some installations the brackets must be moved far enough forward or backwards
or rotated so that only two screws will align with the threaded screw holes
on the radio. Two screws are sufficient to hold the brackets in place.
NOTE: You may need to cut, trim or bend the brackets to achieve a perfect fit. You can
even drill new mounting holes into the bracket if you need to. The InfiniMount system is
designed to be modified, and modifying your brackets will NOT void your warranty.
Figure 3 - Attach InfiniMount Brackets
R
