36
OPERATING YOUR REDONDO RT
Display Color (SCAN)
This sub-menu changes the display color. The default setting is
SCAN
,
which will scan through all of the available colors. To customize your
display color, look for the word
SCAN
in the sub-menu (if a custom
color has already been chosen, look for that color name in the
sub-menu), then rotate the right outside thumb-roller (#9) to select
one of the preset colors:
white
,
green 1
,
green 2
,
green 3
,
orange
,
red
,
pink
,
purple 1
,
purple 2
,
blue 1
,
blue 2
,
user
,
Scan
.
To create a custom color, select
USER
and press the right outside
thumb-roller (#9) once. This will allow you to edit the RGB values for
32,000 color variations. Rotate the right outside thumb-roller (#9) up or
down to adjust the reds, then press the same thumb-roller (#9) to move
to the greens. Repeat this process to adjust the greens and the blues.
Note: If you lower all RGB settings down to “00” the display will go black, and you will
need to reset the radio by disconnecting all power from the unit for 2 minutes. This will
reset your radio back to the factory defaults.
Dimmer
This sub-menu adjusts the radio’s display brightness between high
(
DIMM HIGH
), mid (
DIMM MID
) and low (
DIMM LOW
).
Bluetooth
®
ON/OFF (BT)
This sub-menu turns Bluetooth
®
on or off. Bluetooth
®
must be enabled
in order to connect a Bluetooth
®
device for hands-free operation or
streaming audio.
Bluetooth
®
Connect/Disconnect
This sub-menu enables the radio to be discoverable on your
Bluetooth
®
device. Choose
BT CONNEC
to allow your device to connect,
and
BT DISCON
to disable Bluetooth
®
connections. To connect your
device, choose
BT CONNEC
, then search for “RETROSOUND” in your
phone’s Bluetooth
®
device list. Enter password “0000” if prompted.
