background image

41

USB Playback Mode

The preset buttons on the front of the radio’s control face (#3-7) 
will enable you to play/pause, listen to 10 seconds of each song 
(

INT

), repeat the track you’re listening to (

RPT

), randomly shuffle all 

songs from a USB flash drive (

RDM

), and navigate folders. 

To play or pause, press button (#3). 

To activate/deactivate scan, press button (#4).

To activate/deactivate shuffle, press button (#5).

To go to the previous folder, press button (#6).

To go to the next folder, press button (#7).

To switch to the next song, rotate the right-front knob (#8) 
clockwise (Redondo RS) or rotate the right outside thumb-roller 
(#9) up (Redondo RT).

To switch to the previous song, rotate the right-front knob (#8)  
counter-clockwise or rotate the right outside thumb-roller (#9) down.

You can cycle through the folders while seeing the folder names. To 
do this, rotate the right-rear knob (#9) counter-clockwise or rotate the 
right inside thumb-roller (#8) up to see the folder name, then cycle 
through the folders by using the right-front knob (#8) or right outside 
thumb-roller (#9). Press the right-front knob (#8) or right inside thumb-
roller (#8) to select a folder.

To activate/deactivate repeat, turn the right-rear knob (#9) clockwise 
or rotate the right inside thumb-roller (#8) down.

USB/APPLE

®

 DEVICE INSTRUCTIONS

Summary of Contents for RS





















































Reviews: